flux linkage การใช้

• Flux linkage is commonly used to estimate the magnetic flux of an AC motor.
• An emf is induced in a coil or conductor whenever there is change in the flux linkages.
• In conclusion, flux linkage should be interpreted as an extension rather than an equivalent to magnetic flux.
• Permanent magnet synchronous motors have quite limited field-weakening speed range due to the constant magnet flux linkage.
• The diagram is currently illustrating transformer and shows the magnetic flux linkage in a stylised single-phase two-winding transformer.
• The " magnetic flux linkage ", " ? " m, is generalized from the circuit characteristic of an inductor.
• A common application of loading coils is to improve the flux linkages, without which the number of turns on the coil would need to be increased.
• When the change in flux linkage arises from a change in the magnetic field around the stationary conductor, the emf is " dynamically induced ."
• A decoupling term is sometimes added to the controller output to improve control performance to mitigate cross coupling or big and rapid changes in speed, current and flux linkage.
• 5 . d-axis component of the stator current vector is used to control the rotor flux linkage and the imaginary q-axis component is used to control the motor torque.
• A "'memristor "'(; a portmanteau of " memory resistor " ) is a hypothetical non-linear electrical component relating electric charge and magnetic flux linkage.
• For example, the circuit with the radial segment in Figure 2 according to the right-hand rule " adds " to the applied B-field, tending to increase the flux linkage.
• Without the data for the generator ( frequency range, inductance, recistance, flux linkage ) it is hard to analyze that ciurcit .-- talk ) 08 : 48, 15 July 2010 ( UTC)
• The additional energy for this would be taken from the input energy, so that the flux linkage to the coil is not affected by the losses and the coil can be treated as an ideal lossless coil.
• Due to the equivalence of flux linkage and total magnetic flux in the case of inductance, it is popularly accepted that the flux linkage is simply an alternative term for total flux, used for convenience in engineering applications.
• Due to the equivalence of flux linkage and total magnetic flux in the case of inductance, it is popularly accepted that the flux linkage is simply an alternative term for total flux, used for convenience in engineering applications.
• In this case the flux linkage is simply the flux density passing through the loop multiplied by its surface area; i . e ., \ lambda = | \ vec { B } | \, A = BA.
• One approach is to define the notion of " rate of change of flux linkage " by drawing a hypothetical line across the disc from the brush to the axle and asking how much flux linkage is swept past this line per unit time.
• One approach is to define the notion of " rate of change of flux linkage " by drawing a hypothetical line across the disc from the brush to the axle and asking how much flux linkage is swept past this line per unit time.
• For a memristor, the electric field in the element is not as negligible as for the case of inductance, so the "'flux linkage "'is no longer equivalent to "'magnetic flux " '.